Inconel 601 Blind Flanges are forged nickel-chromium-iron alloy (aluminum-enhanced) flanges made from UNS N06601 / W.Nr. 2.4851 material, typically supplied to ASTM B564 material requirements and ASME B16.5 dimensional standards in pressure classes 150# – 2500#. Ragnar Metals & Tubes manufactures and exports these flanges with RF / FF / RTJ facing options, EN 10204 3.1/3.2 documentation, and third-party inspection on request.
Ragnar Metals & Tubes is a 601 Blind Flange Supplier and manufacturer of Inconel 601 (UNS N06601) blind flanges to ASTM B564 and applicable ASME flange dimensional standards, with common sizes and classes available from stock, subject to current inventory, for export and EPC orders.
A blind flange is a solid disc with no bore, bolted to a flanged pipe end, vessel opening or valve to seal off the line completely for testing, isolation or future connection. Because it carries no bore, a blind flange must resist the full internal pressure across its face without the reinforcing effect of a hub, so thickness increases with pressure class more steeply than for bored flange types.
Inconel 601 is a nickel-chromium-iron alloy (aluminum-enhanced) (UNS N06601) known for an aluminum-bearing oxide film that gives excellent resistance to oxidation at very high temperatures.
UNS Number
Grade
Flange Type
Standard
MTC
Inspection
Origin
Export
| Class | Standard | Typical Facing |
|---|---|---|
| 150 | ASME B16.5 | RF / FF / RTJ |
| 300 | ASME B16.5 | RF / FF / RTJ |
| 600 | ASME B16.5 | RF / RTJ |
| 900 | ASME B16.5 | RF / RTJ |
| 1500 | ASME B16.5 | RF / RTJ |
| 2500 | ASME B16.5 | RF / RTJ |
Not every class/size combination applies to every flange type. Pressure-temperature ratings must be selected against the applicable ASME rating tables and actual design conditions.
Send us your size, class and quantity — we'll come back with pricing and lead time.
The Middle East and Indian sub-continent are home to hundreds of metal suppliers ranging from small trading shops to large ISO-certified manufacturers. International buyers typically evaluate a supplier on quality compliance, production capability, export experience and pricing transparency before placing a bulk order.
Solid, bore-free disc design
Used to close off pipe ends, vessel nozzles or valves
Available with tapped holes for future branch connections
Suited to hydrostatic pressure testing
Available in all standard pressure classes
Manufactured from Inconel 601 (UNS N06601) for an aluminum-bearing oxide film that gives excellent resistance to oxidation at very high temperatures
| Product | Composition | Usage | Standards |
|---|---|---|---|
| Inconel 601 Blind Flange – Standard Class | UNS N06601 | General process piping | ASME B16.5 |
| Inconel 601 Blind Flange – High Pressure | UNS N06601 | High-pressure / critical service | ASME B16.5 |
| Specification | Details |
|---|---|
| UNS Number | N06601 |
| Grade | 601 |
| Flange Type | Blind Flange |
| Standard | ASTM B564 / ASME B16.5 |
| Werkstoff Number | 2.4851 |
| Pressure Class | 150# – 2500# |
| Facing | RF / FF / RTJ |
| Size (mm) | Size (mm) |
|---|---|
| 15 | 20 |
| 25 | 32 |
| 40 | 50 |
| 65 | 80 |
| 100 | 125 |
| 150 | 200 |
| 250 | 300 |
| 350 | 400 |
| 450 | 500 |
| 600 |
| Element | Composition (%) |
|---|---|
| Nickel (Ni) | 58.0 – 63.0 |
| Chromium (Cr) | 21.0 – 25.0 |
| Iron (Fe) | Balance |
| Aluminum (Al) | 1.0 – 1.7 |
| Carbon (C) | 0.10 Max |
| Manganese (Mn) | 1.0 Max |
| Silicon (Si) | 0.5 Max |
| Property | Value |
|---|---|
| Tensile Strength | 550 MPa Min (annealed) |
| Yield Strength (0.2%) | 240 MPa Min |
| Elongation | 30% Min |
| Property | Metric | Imperial |
|---|---|---|
| Density | 8.11 g/cm³ | 0.293 lb/in³ |
| Melting Point | 1330 – 1370 °C | 2426 – 2498 °F |
| Value (µΩ·m) | Temperature (°C) | Condition |
|---|---|---|
| 1.34 | 20 | Annealed |
| Standard | Werkstoff Nr. | UNS |
|---|---|---|
| UNS | 2.4851 | N06601 |
| ASTM / ASME | B564 / SB564 | N06601 |
| Common Trade Name | Inconel 601 | N06601 |
Forged Inconel 601 billets are pressed into flange blanks, solution annealing to restore corrosion resistance and mechanical properties, then CNC-machined to the required class, bore and facing.
| Process | Temperature | Medium | Purpose |
|---|---|---|---|
| Solution Annealing | 1000 – 1150°C | Air or Water Quench | Restore corrosion resistance after forging |
Not sure of every specification? Send your drawing, BOQ or existing part photo and our team can review the requirement.
1/2" – 24" NB · Forged, RF facing
Line closure, isolation
As per drawing · Forged with threaded ports
Future branch connections, instrumentation
High-temperature furnace components
Heat-treatment fixtures and baskets
Thermal processing equipment
Petrochemical furnace piping
Power generation components
Sealing off pipeline ends for testing or future expansion
Blanking vessel nozzles and manway openings
| Property | Inconel 601 | Inconel 600 |
|---|---|---|
| Alloy Family | Nickel-Chromium-Iron Alloy (Aluminum-Enhanced) | Nickel-Chromium-Iron Alloy |
| UNS / Werkstoff | N06601 / 2.4851 | N06600 / 2.4816 |
Choose Inconel 600 for general corrosion resistance where sustained service stays below roughly 1000°C, at a lower cost.
| Size | Price (USD) | Price (INR) |
|---|---|---|
| 1/2" – 2" NB, 150# | $18 – $40 / pc | ₹1,500 – ₹3,300 / pc |
| 4" – 8" NB, 300# | $70 – $250 / pc | ₹5,800 – ₹20,750 / pc |
| 10" – 24" NB, 600# | $350 – $1,600 / pc | ₹29,000 – ₹1,33,000 / pc |
Indicative only — actual price depends on size, class, quantity and market rates. Request current pricing above.
Common sizes and standard pressure classes may be available from stock, subject to current inventory. Non-standard sizes, higher pressure classes and project-specific inspection requirements are manufactured or sourced against confirmed orders. Contact us for current stock status and lead time.
MOQ: 25 – 100 Kg / pieces depending on grade, size and product form.
Payment: T/T (bank transfer), Letter of Credit (LC at sight or usance), and SWIFT transfer, depending on order value and buyer requirements.
All export orders are packed in seaworthy, fumigated wooden crates with waterproof inner lining, or palletised packing with clear shipping marks and heat-number identification for full traceability.
Container stuffing is supervised and loading photographs are shared on request, along with certificates of origin, mill test certificates and packing lists for smooth customs clearance at destination ports.
Every Inconel 601 Blind Flange is checked for chemistry, tensile strength, hardness and dimensions before dispatch. PMI, radiography and third-party inspection (TUV, BV, SGS, Lloyd's) are available on request, with EN 10204 3.1/3.2 certification.
Documents listed are available on request; not every document applies to every order.
NPS / DN size
Pressure class
Quantity
Facing
Pipe schedule / bore
Material / standard requirement
MTC requirement
Third-party inspection requirement
Delivery location
Required delivery date
Don't know all the specifications? Send your drawing, BOQ or existing part photo and our team can review the requirement.
601 Blind Flange Manufacturer — full mill traceability with every order
601 Blind Flange Exporter — export documentation and seaworthy packing for every shipment
601 Blind Flange Stockist — common classes and sizes available from stock, subject to inventory
601 Blind Flange Distributor — dedicated support for EPC contractors and trading partners
20+ years exporting nickel and specialty alloy flanges
ISO certified quality systems
Inconel 601 sourced and tested to ASTM B564
Mumbai, Delhi, Pune, Chennai, Hyderabad, Bengaluru, Ahmedabad, Rajkot, Coimbatore, Kolkata, Surat, Vadodara
For buyers searching for a 601 Blind Flange in UAE, Ragnar Metals & Tubes is an India-based manufacturer and exporter supplying Inconel 601 Blind Flanges to buyers and EPC contractors in the UAE, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain, with export documentation and seaworthy packing for every shipment.
UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, USA, UK, Germany, South Africa, Australia, Malaysia
ISO 9001:2015
ISO 10002:2018
GST Registration
Udyam Registration
Before placing an order, confirm:
Don't know the exact specification yet? Send your BOQ or drawing and we'll confirm it with you.
Send us your size, class and quantity — we'll come back with pricing and lead time.
Browse: All Flanges
A blind flange is a solid disc with no bore, bolted to a flanged pipe end, vessel opening or valve to seal off the line completely for testing, isolation or future connection.
150# – 2500# per ASME B16.5, depending on size and facing.
Yes, EN 10204 3.1 as standard; 3.2 third-party certification on request.
RF / FF / RTJ.
Yes, we regularly export to the UAE, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain.
Yes, through TUV, BV, SGS or Lloyd's before dispatch.
The material is supplied to ASTM B564 (UNS N06601); dimensions follow the applicable ASME flange dimensional standard, including ASME B16.5 and, for larger sizes, ASME B16.47.
Size (NPS/DN), pressure class, facing, quantity, MTC and inspection requirements, and delivery location.
Yes, a sample Material Test Certificate can be shared on request to confirm our documentation format.
Blind flanges are used where a permanent or long-term closure is needed, such as capping a spare nozzle or isolating a line for testing, rather than where flow needs to be controlled.
Inconel 601 offers an aluminum-bearing oxide film that gives excellent resistance to oxidation at very high temperatures.
Yes — Inconel 601 Blind Flanges in UNS N06601 are exactly what we manufacture and export; share your size, class and quantity and we'll quote directly.
