Inconel 625 Orifice Flanges are forged nickel-chromium-molybdenum-niobium alloy flanges made from UNS N06625 / W.Nr. 2.4856 material, typically supplied to ASTM B564 material requirements and ASME B16.5 dimensional standards in pressure classes 150# – 2500#. Ragnar Metals & Tubes manufactures and exports these flanges with RF / RTJ facing options, EN 10204 3.1/3.2 documentation, and third-party inspection on request.
Ragnar Metals & Tubes is a 625 Orifice Flange Supplier and manufacturer of Inconel 625 (UNS N06625) orifice flanges to ASTM B564 and applicable ASME flange dimensional standards, with common sizes and classes available from stock, subject to current inventory, for export and EPC orders.
An orifice flange is manufactured with radial and/or flange taps for mounting an orifice plate, letting differential pressure across the plate be measured for flow metering. Orifice flange pairs are usually supplied with jack screws to ease separation for orifice-plate inspection or replacement, and are built on a weld neck or slip-on base flange body.
Inconel 625 is a nickel-chromium-molybdenum-niobium alloy (UNS N06625) known for high strength combined with excellent resistance to pitting, crevice corrosion and chloride-ion stress corrosion cracking, without requiring age-hardening.
UNS Number
Grade
Flange Type
Standard
MTC
Inspection
Origin
Export
| Class | Standard | Typical Facing |
|---|---|---|
| 150 | ASME B16.5 | RF / FF / RTJ |
| 300 | ASME B16.5 | RF / FF / RTJ |
| 600 | ASME B16.5 | RF / RTJ |
| 900 | ASME B16.5 | RF / RTJ |
| 1500 | ASME B16.5 | RF / RTJ |
| 2500 | ASME B16.5 | RF / RTJ |
Not every class/size combination applies to every flange type. Pressure-temperature ratings must be selected against the applicable ASME rating tables and actual design conditions.
Send us your size, class and quantity — we'll come back with pricing and lead time.
The Middle East and Indian sub-continent are home to hundreds of metal suppliers ranging from small trading shops to large ISO-certified manufacturers. International buyers typically evaluate a supplier on quality compliance, production capability, export experience and pricing transparency before placing a bulk order.
Radial or flange taps for differential-pressure flow measurement
Supplied as a matched pair with an orifice plate
Jack screws included for easier plate access
Built on a standard weld neck or slip-on flange body
Used with standard ASME B16.36 orifice plates
Manufactured from Inconel 625 (UNS N06625) for high strength combined with excellent resistance to pitting
| Product | Composition | Usage | Standards |
|---|---|---|---|
| Inconel 625 Orifice Flange – Standard Class | UNS N06625 | General process piping | ASME B16.5 |
| Inconel 625 Orifice Flange – High Pressure | UNS N06625 | High-pressure / critical service | ASME B16.5 |
| Specification | Details |
|---|---|
| UNS Number | N06625 |
| Grade | 625 |
| Flange Type | Orifice Flange |
| Standard | ASTM B564 / ASME B16.5 |
| Werkstoff Number | 2.4856 |
| Pressure Class | 150# – 2500# |
| Facing | RF / RTJ |
| Size (mm) | Size (mm) |
|---|---|
| 15 | 20 |
| 25 | 32 |
| 40 | 50 |
| 65 | 80 |
| 100 | 125 |
| 150 | 200 |
| 250 | 300 |
| 350 | 400 |
| 450 | 500 |
| 600 |
| Element | Composition (%) |
|---|---|
| Nickel (Ni) | 58.0 Min |
| Chromium (Cr) | 20.0 – 23.0 |
| Molybdenum (Mo) | 8.0 – 10.0 |
| Niobium + Tantalum (Nb+Ta) | 3.15 – 4.15 |
| Iron (Fe) | 5.0 Max |
| Carbon (C) | 0.10 Max |
| Property | Value |
|---|---|
| Tensile Strength | 827 MPa Min (annealed) |
| Yield Strength (0.2%) | 414 MPa Min |
| Elongation | 30% Min |
| Property | Metric | Imperial |
|---|---|---|
| Density | 8.44 g/cm³ | 0.305 lb/in³ |
| Melting Point | 1290 – 1350 °C | 2350 – 2460 °F |
| Value (µΩ·m) | Temperature (°C) | Condition |
|---|---|---|
| 1.29 | 20 | Annealed |
| Standard | Werkstoff Nr. | UNS |
|---|---|---|
| UNS | 2.4856 | N06625 |
| ASTM / ASME | B564 / SB564 | N06625 |
| Common Trade Name | Inconel 625 | N06625 |
Forged Inconel 625 billets are pressed into flange blanks, solution annealing to restore corrosion resistance and mechanical properties, then CNC-machined to the required class, bore and facing.
| Process | Temperature | Medium | Purpose |
|---|---|---|---|
| Solution Annealing | 1090 – 1150°C | Water Quench or Rapid Air Cool | Dissolve carbides/precipitates, restore ductility |
Not sure of every specification? Send your drawing, BOQ or existing part photo and our team can review the requirement.
1/2" – 24" NB · Forged, RF/RTJ facing, with taps
Flow metering stations
Marine and subsea equipment
Sour-gas and offshore oil & gas piping
Aerospace ducting
Chemical processing
Flue-gas desulfurization systems
Custody-transfer and process flow metering
Differential-pressure flow measurement stations
| Property | Inconel 625 | Incoloy 825 |
|---|---|---|
| Alloy Family | Nickel-Chromium-Molybdenum-Niobium Alloy | Nickel-Iron-Chromium-Molybdenum-Copper Alloy |
| UNS / Werkstoff | N06625 / 2.4856 | N08825 / 2.4858 |
Inconel 625 offers higher strength than Incoloy 825; 825 is often selected instead where cost is a bigger factor and service conditions are less demanding.
| Size | Price (USD) | Price (INR) |
|---|---|---|
| 1/2" – 2" NB, 150# | $35 – $80 / pc | ₹2,900 – ₹6,600 / pc |
| 4" – 8" NB, 300# | $150 – $500 / pc | ₹12,450 – ₹41,500 / pc |
| 10" – 24" NB, 600# | $700 – $3,200 / pc | ₹58,000 – ₹2,65,000 / pc |
Indicative only — actual price depends on size, class, quantity and market rates. Request current pricing above.
Common sizes and standard pressure classes may be available from stock, subject to current inventory. Non-standard sizes, higher pressure classes and project-specific inspection requirements are manufactured or sourced against confirmed orders. Contact us for current stock status and lead time.
MOQ: 25 – 100 Kg / pieces depending on grade, size and product form.
Payment: T/T (bank transfer), Letter of Credit (LC at sight or usance), and SWIFT transfer, depending on order value and buyer requirements.
All export orders are packed in seaworthy, fumigated wooden crates with waterproof inner lining, or palletised packing with clear shipping marks and heat-number identification for full traceability.
Container stuffing is supervised and loading photographs are shared on request, along with certificates of origin, mill test certificates and packing lists for smooth customs clearance at destination ports.
Every Inconel 625 Orifice Flange is checked for chemistry, tensile strength, hardness and dimensions before dispatch. PMI, radiography and third-party inspection (TUV, BV, SGS, Lloyd's) are available on request, with EN 10204 3.1/3.2 certification.
Documents listed are available on request; not every document applies to every order.
NPS / DN size
Pressure class
Quantity
Facing
Pipe schedule / bore
Material / standard requirement
MTC requirement
Third-party inspection requirement
Delivery location
Required delivery date
Don't know all the specifications? Send your drawing, BOQ or existing part photo and our team can review the requirement.
625 Orifice Flange Manufacturer — full mill traceability with every order
625 Orifice Flange Exporter — export documentation and seaworthy packing for every shipment
625 Orifice Flange Stockist — common classes and sizes available from stock, subject to inventory
625 Orifice Flange Distributor — dedicated support for EPC contractors and trading partners
20+ years exporting nickel and specialty alloy flanges
ISO certified quality systems
Inconel 625 sourced and tested to ASTM B564
Mumbai, Delhi, Pune, Chennai, Hyderabad, Bengaluru, Ahmedabad, Rajkot, Coimbatore, Kolkata, Surat, Vadodara
For buyers searching for a 625 Orifice Flange in UAE, Ragnar Metals & Tubes is an India-based manufacturer and exporter supplying Inconel 625 Orifice Flanges to buyers and EPC contractors in the UAE, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain, with export documentation and seaworthy packing for every shipment.
UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, USA, UK, Germany, South Africa, Australia, Malaysia
ISO 9001:2015
ISO 10002:2018
GST Registration
Udyam Registration
Before placing an order, confirm:
Don't know the exact specification yet? Send your BOQ or drawing and we'll confirm it with you.
Send us your size, class and quantity — we'll come back with pricing and lead time.
Browse: All Flanges
An orifice flange is manufactured with radial and/or flange taps for mounting an orifice plate, letting differential pressure across the plate be measured for flow metering.
150# – 2500# per ASME B16.5, depending on size and facing.
Yes, EN 10204 3.1 as standard; 3.2 third-party certification on request.
RF / RTJ.
Yes, we regularly export to the UAE, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain.
Yes, through TUV, BV, SGS or Lloyd's before dispatch.
The material is supplied to ASTM B564 (UNS N06625); dimensions follow the applicable ASME flange dimensional standard, including ASME B16.5 and, for larger sizes, ASME B16.47.
Size (NPS/DN), pressure class, facing, quantity, MTC and inspection requirements, and delivery location.
Yes, a sample Material Test Certificate can be shared on request to confirm our documentation format.
The flange pair itself is often supplied separately from the orifice plate, which is sized specifically for the required flow rate and differential pressure — confirm requirements when ordering.
Inconel 625 offers high strength combined with excellent resistance to pitting, crevice corrosion and chloride-ion stress corrosion cracking, without requiring age-hardening.
Yes — Inconel 625 Orifice Flanges in UNS N06625 are exactly what we manufacture and export; share your size, class and quantity and we'll quote directly.
