Incoloy 800H Slip On Flanges are forged nickel-iron-chromium alloy (controlled carbon/grain size) flanges made from UNS N08810 / W.Nr. 1.4958 material, typically supplied to ASTM B564 material requirements and ASME B16.5 dimensional standards in pressure classes 150# – 1500#. Ragnar Metals & Tubes manufactures and exports these flanges with RF / FF facing options, EN 10204 3.1/3.2 documentation, and third-party inspection on request.
Ragnar Metals & Tubes is a 800H Slip On Flange Supplier and manufacturer of Incoloy 800H (UNS N08810) slip on flanges to ASTM B564 and applicable ASME flange dimensional standards, with common sizes and classes available from stock, subject to current inventory, for export and EPC orders.
A slip-on flange has a bore slightly larger than the pipe outside diameter, allowing it to slide over the pipe end before being fillet-welded on both the inside and outside faces. Slip-on flanges are easier to align and generally lower cost than weld neck flanges, though their fillet-weld joint is generally rated at a fraction of the fatigue strength of a full-penetration weld neck joint under cyclic loading.
Incoloy 800H is a nickel-iron-chromium alloy (controlled carbon/grain size) (UNS N08810) known for controlled carbon content and coarser grain size versus standard 800, giving improved creep and stress-rupture strength for sustained high-temperature service.
UNS Number
Grade
Flange Type
Standard
MTC
Inspection
Origin
Export
| Class | Standard | Typical Facing |
|---|---|---|
| 150 | ASME B16.5 | RF / FF / RTJ |
| 300 | ASME B16.5 | RF / FF / RTJ |
| 600 | ASME B16.5 | RF / RTJ |
| 900 | ASME B16.5 | RF / RTJ |
| 1500 | ASME B16.5 | RF / RTJ |
| 2500 | ASME B16.5 | RF / RTJ |
Not every class/size combination applies to every flange type. Pressure-temperature ratings must be selected against the applicable ASME rating tables and actual design conditions.
Send us your size, class and quantity — we'll come back with pricing and lead time.
The Middle East and Indian sub-continent are home to hundreds of metal suppliers ranging from small trading shops to large ISO-certified manufacturers. International buyers typically evaluate a supplier on quality compliance, production capability, export experience and pricing transparency before placing a bulk order.
Bore sized to slip over the pipe OD
Fillet-welded inside and outside for a double weld joint
Easier alignment than weld neck flanges
Lower material and labor cost than weld neck flanges
Common in low-to-moderate pressure piping
Manufactured from Incoloy 800H (UNS N08810) for controlled carbon content and coarser grain size versus standard 800
| Product | Composition | Usage | Standards |
|---|---|---|---|
| Incoloy 800H Slip On Flange – Standard Class | UNS N08810 | General process piping | ASME B16.5 |
| Incoloy 800H Slip On Flange – High Pressure | UNS N08810 | High-pressure / critical service | ASME B16.5 |
| Specification | Details |
|---|---|
| UNS Number | N08810 |
| Grade | 800H |
| Flange Type | Slip On Flange |
| Standard | ASTM B564 / ASME B16.5 |
| Werkstoff Number | 1.4958 |
| Pressure Class | 150# – 1500# |
| Facing | RF / FF |
| Size (mm) | Size (mm) |
|---|---|
| 15 | 20 |
| 25 | 32 |
| 40 | 50 |
| 65 | 80 |
| 100 | 125 |
| 150 | 200 |
| 250 | 300 |
| 350 | 400 |
| 450 | 500 |
| 600 |
| Element | Composition (%) |
|---|---|
| Nickel (Ni) | 30.0 – 35.0 |
| Chromium (Cr) | 19.0 – 23.0 |
| Iron (Fe) | 39.5 Min |
| Aluminum + Titanium (Al+Ti) | 0.30 – 1.20 |
| Carbon (C) | 0.05 – 0.10 |
| Property | Value |
|---|---|
| Tensile Strength | 450 MPa Min (annealed) |
| Yield Strength (0.2%) | 170 MPa Min |
| Elongation | 30% Min |
| Grain Size | ASTM No. 5 or coarser |
| Property | Metric | Imperial |
|---|---|---|
| Density | 7.94 g/cm³ | 0.287 lb/in³ |
| Melting Point | 1357 – 1385 °C | 2475 – 2525 °F |
| Value (µΩ·m) | Temperature (°C) | Condition |
|---|---|---|
| 0.99 | 20 | Annealed |
| Standard | Werkstoff Nr. | UNS |
|---|---|---|
| UNS | 1.4958 | N08810 |
| ASTM / ASME | B564 / SB564 | N08810 |
| Common Trade Name | Incoloy 800H | N08810 |
Forged Incoloy 800H billets are pressed into flange blanks, solution annealing to restore corrosion resistance and mechanical properties, then CNC-machined to the required class, bore and facing.
| Process | Temperature | Medium | Purpose |
|---|---|---|---|
| Solution Annealing | 1149°C Min | Air or Water Quench | Develop controlled grain size for creep strength |
Not sure of every specification? Send your drawing, BOQ or existing part photo and our team can review the requirement.
1/2" – 24" NB · Forged, RF facing
General low-to-moderate pressure piping
Ethylene pyrolysis furnace tubing/fittings
Steam-methane reformer components
High-temperature process piping
Petrochemical furnace equipment
General industrial piping where full weld-neck integrity is not required
Retrofit and field installation where alignment tolerance helps
| Property | Incoloy 800H | Incoloy 800HT |
|---|---|---|
| Alloy Family | Nickel-Iron-Chromium Alloy (Controlled Carbon/Grain Size) | Nickel-Iron-Chromium Alloy (Enhanced Creep Strength) |
| UNS / Werkstoff | N08810 / 1.4958 | N08811 / 1.4959 |
Incoloy 800HT tightens the Al+Ti range further versus 800H for additional creep-rupture strength; 800H remains a strong general-purpose choice for most high-temperature service.
| Size | Price (USD) | Price (INR) |
|---|---|---|
| 1/2" – 2" NB, 150# | $18 – $40 / pc | ₹1,500 – ₹3,300 / pc |
| 4" – 8" NB, 300# | $70 – $250 / pc | ₹5,800 – ₹20,750 / pc |
| 10" – 24" NB, 600# | $350 – $1,600 / pc | ₹29,000 – ₹1,33,000 / pc |
Indicative only — actual price depends on size, class, quantity and market rates. Request current pricing above.
Common sizes and standard pressure classes may be available from stock, subject to current inventory. Non-standard sizes, higher pressure classes and project-specific inspection requirements are manufactured or sourced against confirmed orders. Contact us for current stock status and lead time.
MOQ: 25 – 100 Kg / pieces depending on grade, size and product form.
Payment: T/T (bank transfer), Letter of Credit (LC at sight or usance), and SWIFT transfer, depending on order value and buyer requirements.
All export orders are packed in seaworthy, fumigated wooden crates with waterproof inner lining, or palletised packing with clear shipping marks and heat-number identification for full traceability.
Container stuffing is supervised and loading photographs are shared on request, along with certificates of origin, mill test certificates and packing lists for smooth customs clearance at destination ports.
Every Incoloy 800H Slip On Flange is checked for chemistry, tensile strength, hardness and dimensions before dispatch. PMI, radiography and third-party inspection (TUV, BV, SGS, Lloyd's) are available on request, with EN 10204 3.1/3.2 certification.
Documents listed are available on request; not every document applies to every order.
NPS / DN size
Pressure class
Quantity
Facing
Pipe schedule / bore
Material / standard requirement
MTC requirement
Third-party inspection requirement
Delivery location
Required delivery date
Don't know all the specifications? Send your drawing, BOQ or existing part photo and our team can review the requirement.
800H Slip On Flange Manufacturer — full mill traceability with every order
800H Slip On Flange Exporter — export documentation and seaworthy packing for every shipment
800H Slip On Flange Stockist — common classes and sizes available from stock, subject to inventory
800H Slip On Flange Distributor — dedicated support for EPC contractors and trading partners
20+ years exporting nickel and specialty alloy flanges
ISO certified quality systems
Incoloy 800H sourced and tested to ASTM B564
Mumbai, Delhi, Pune, Chennai, Hyderabad, Bengaluru, Ahmedabad, Rajkot, Coimbatore, Kolkata, Surat, Vadodara
For buyers searching for a 800H Slip On Flange in UAE, Ragnar Metals & Tubes is an India-based manufacturer and exporter supplying Incoloy 800H Slip On Flanges to buyers and EPC contractors in the UAE, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain, with export documentation and seaworthy packing for every shipment.
UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, USA, UK, Germany, South Africa, Australia, Malaysia
ISO 9001:2015
ISO 10002:2018
GST Registration
Udyam Registration
Before placing an order, confirm:
Don't know the exact specification yet? Send your BOQ or drawing and we'll confirm it with you.
Send us your size, class and quantity — we'll come back with pricing and lead time.
Browse: All Flanges
A slip-on flange has a bore slightly larger than the pipe outside diameter, allowing it to slide over the pipe end before being fillet-welded on both the inside and outside faces.
150# – 1500# per ASME B16.5, depending on size and facing.
Yes, EN 10204 3.1 as standard; 3.2 third-party certification on request.
RF / FF.
Yes, we regularly export to the UAE, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain.
Yes, through TUV, BV, SGS or Lloyd's before dispatch.
The material is supplied to ASTM B564 (UNS N08810); dimensions follow the applicable ASME flange dimensional standard, including ASME B16.5 and, for larger sizes, ASME B16.47.
Size (NPS/DN), pressure class, facing, quantity, MTC and inspection requirements, and delivery location.
Yes, a sample Material Test Certificate can be shared on request to confirm our documentation format.
No — its double fillet weld is generally rated at a fraction of the fatigue strength of a weld neck's full-penetration joint, so weld neck is preferred for high-pressure or cyclic service.
Incoloy 800H offers controlled carbon content and coarser grain size versus standard 800, giving improved creep and stress-rupture strength for sustained high-temperature service.
Yes — Incoloy 800H Slip On Flanges in UNS N08810 are exactly what we manufacture and export; share your size, class and quantity and we'll quote directly.
